# nSuns LP

> High-volume 5/3/1 variant with aggressive linear progression — 17 working sets per session across two barbell lifts.

- Author: /u/nSuns
- Frequency: 5 days a week
- Workout length: 60-90 minutes
- Goal: strength
- Training experience: 3 to 12 months
- Web page: https://www.liftosaur.com/programs/nsuns

A high-volume linear progression program that blends Wendler's 5/3/1 rep scheme with Sheiko-inspired volume. Each session pairs a heavy T1 compound lift (9 sets) with a lighter T2 compound lift (8 sets), plus accessories. Bench press is trained twice per week — once as a volume day and once as a 5/3/1 day. Weekly progression is driven by AMRAP performance on the T1 top set.

## Origin & Philosophy

nSuns LP was created by Reddit user [/u/nSuns](https://thefitness.wiki/routines/nsuns-lp/) around 2016-2017. The creator used this program to bring their squat/bench/deadlift total from 905 lbs to 1,215 lbs over roughly 6 months. The program became one of the most popular routines on Reddit, spawning its own subreddit (r/nSuns) with thousands of users sharing results and accessory recommendations.

The core idea is "Wendler in the front, Sheiko in the back" — each session opens with a 5/3/1-style ramp to a heavy AMRAP set (like Wendler), then follows with 6 high-volume backoff sets (like Sheiko). This gives you both the heavy singles/triples that build maximal strength and the accumulated volume that drives hypertrophy and technique refinement.

## Who It's For

- **Experience level**: Late beginner to intermediate (6-18 months). You need solid technique on the big four lifts because you'll be handling heavy loads for many sets.
- **Primary goal**: Strength, with significant hypertrophy as a side effect from the high volume.
- **Best suited for**: Bulking or maintenance with adequate caloric intake. The 17 compound sets per session create substantial fatigue — recovery suffers in a caloric deficit.
- **Prerequisites**: You should be comfortable with Squat, Bench Press, Deadlift, and Overhead Press form. If you can't maintain technique under fatigue, build that base first with a simpler program.

## Pros & Cons

**Pros**

- Bench Press trained 2x/week (volume + 5/3/1) — builds pressing strength and technique faster than once-per-week programs
- AMRAP sets provide built-in auto-regulation: progression scales with performance (2-3 reps = +5lb, 4-5 reps = +10lb, 6+ reps = +15lb)
- High volume per session (17 working sets across two compound lifts) drives both strength and muscle growth
- Massive community on Reddit (r/nSuns) with accessory templates, troubleshooting, and thousands of user reviews
- Flexible accessory structure lets you target individual weak points

**Cons**

- Sessions routinely take 75-90 minutes including rest between the 17 compound sets
- Very pressing-heavy: 4 of the 5 T1/T2 pairings are pressing movements — you must add your own back work (rows, pull-ups) to stay balanced
- No built-in deload protocol — you need to self-manage fatigue by reducing your 1RM when you start failing AMRAPs
- Recovery-demanding due to high volume combined with aggressive linear progression — not suitable for cutting

## Program Structure

- **Split**: Each day pairs one T1 (primary) compound lift with one T2 (secondary) compound lift, plus 2 accessories
- **Periodization**: Linear progression — weights increase weekly based on AMRAP performance
- **Schedule**: Fixed 5-day weekly rotation. Typically Mon-Fri with weekends off, or any 5 days that allow at least one rest day per week
- **Layout**: Day 1 is a bench volume day with a unique pyramid scheme. Days 2-5 follow the 5/3/1 pattern (ramp to a heavy AMRAP, then backoff sets)

## Exercise Selection & Rationale

**T1 (Primary) lifts** rotate through the big four:
- Bench Press appears twice — Day 1 as a volume day (pyramid up to 85% TM, then descend) and Day 5 as a standard 5/3/1 day. The double exposure is deliberate: bench responds well to frequency, and the two distinct rep schemes provide both heavy practice and accumulated volume.
- Squat (Day 2) and Deadlift (Day 4) each get one 5/3/1 day. They're on separate days to avoid competing for lower body recovery.
- Overhead Press (Day 3) gets its own 5/3/1 day, providing direct shoulder pressing volume that also supports bench strength.

**T2 (Secondary) lifts** are chosen to complement the T1 pattern:
- Overhead Press (Day 1 T2) — pressing variation that supports bench day. Lighter pressing volume trains shoulders without interfering with the heavy bench work.
- Sumo Deadlift (Day 2 T2) — hip-dominant pull that provides deadlift-pattern volume on squat day. The sumo stance shifts emphasis to hips and adductors.
- Incline Bench Press (Day 3 T2) — upper chest and front delt emphasis that supports both OHP and flat bench strength.
- Front Squat (Day 4 T2) — quad-dominant squat variation on deadlift day. Builds the quad strength and upright torso position that carry over to conventional deadlift and back squat.
- Bench Press Close Grip (Day 5 T2) — targets triceps lockout strength, the most common bench press sticking point.

**Accessories** are not prescribed by the original program — you choose 2-4 per day based on your weak points. This implementation includes 2 per day as a starting point. The most important addition is pulling work (rows, pull-ups) on every session to balance the heavy pressing volume.

## Set & Rep Scheme

**T1 Volume Day** (Day 1 Bench Press only): 9 sets that pyramid up to 3x4 at 85% TM, then descend back down with increasing reps. The final set is AMRAP. This pattern provides ~50 total reps of bench pressing at moderate-to-heavy loads.

**T1 5/3/1 Days** (Days 2-5): 9 sets starting with a 5/3/1 ramp — 5 reps at 75% TM, 3 reps at 85% TM, then 1+ AMRAP at 95% TM. The remaining 6 sets are backoff work at decreasing percentages. The backoff rep pattern varies by lift:
- Squat and Overhead Press: 3/3/3/5/5/5+ reps
- Deadlift: 3/3/3/3/3/3+ reps (lower backoff reps to manage spinal fatigue)
- Bench Press: 3/5/3/5/3/5+ reps (alternating pattern)

The AMRAP set at 95% TM is the most important set in the program — it determines your weekly progression.

**T2 exercises**: 8 sets ramping from ~50% to ~70% TM, then staying at ~70% for the remaining sets with varying reps (3-8 per set). The rep pattern undulates (3/5/7/4/6/8 on the working sets) to provide both strength and hypertrophy stimulus at moderate intensity. Total T2 volume is ~44 reps per exercise.

## Progressive Overload

After each session, the app checks your AMRAP performance on the T1 top set (set 3 at 95% TM). Based on reps achieved:
- **2-3 reps**: Increase 1RM by **5 lbs**
- **4-5 reps**: Increase 1RM by **10 lbs**
- **6+ reps**: Increase 1RM by **15 lbs**
- **0-1 reps**: No increase (weight was too heavy)

This AMRAP-based progression means the program auto-adjusts: if your 1RM is set correctly, you'll typically hit 2-3 reps and progress by 5 lbs/week. If you set it too conservatively, you'll hit 5+ reps and catch up quickly.

**T2 exercises** increase 1RM linearly after each successful session: **+5 lbs** for upper body T2 lifts (Bench Press Close Grip, Incline Bench Press), **+10 lbs** for lower body T2 lifts (Sumo Deadlift, Front Squat). Overhead Press T2 weights scale automatically from the OHP T1 AMRAP-based progression since they share the same 1RM.

**When you stall**: If you consistently get only 1 rep on the AMRAP (or fail it entirely), reduce your 1RM by 10% and rebuild. There is no formal deload week — just reset and progress again.

**Accessories** use double progression: increase reps within a range (e.g., 8 to 12), then add 5 lbs and reset to the bottom of the range.

## How Long to Run It / What Next

Run nSuns LP for **12-20 weeks**. It's designed for aggressive linear gains, and most lifters will eventually outpace their recovery capacity.

**Signs it's time to move on**: You're consistently getting only 1 rep on AMRAPs even after a 10% reset, sessions are taking 90+ minutes because you need longer rest periods, or you're dreading the volume.

**Transition to**: [5/3/1 Boring But Big](https://www.liftosaur.com/programs/the531bbb) (slower progression, still high volume), [GZCL The Rippler](https://www.liftosaur.com/programs/gzcl-the-rippler) (periodized intermediate program), or any intermediate program with built-in periodization. nSuns LP is a bridge between beginner linear progression and true intermediate programming.

## Equipment Needed

Barbell, squat rack, flat bench, and weight plates for all T1 and T2 lifts. A cable machine for Lat Pulldown, Triceps Pushdown, and Face Pull. Dumbbells for Bicep Curl, Hammer Curl, and Lateral Raise. A pull-up bar for Chin Up.

**Home gym substitutions** (for cable/machine exercises):
- Lat Pulldown → Pull Up or Chin Up (bodyweight)
- Triceps Pushdown → Skullcrusher (barbell or dumbbell)
- Face Pull → Reverse Fly (dumbbell) or band pull-apart
- Leg Extension → Bulgarian Split Squat (dumbbell or bodyweight)

## Rest Times

- **T1 sets**: **2-3 minutes** between working sets. Take up to **4 minutes** after the AMRAP top set before starting backoff work.
- **T2 sets**: **90-120 seconds**. The intensity is lower, so you shouldn't need more.
- **Accessories**: **60-90 seconds**. Superset pulling and pressing accessories to save time.

## How to Pick Starting Weights

For T1 lifts, set your **1 Rep Max** (1RM) in the app. This program uses percentages of 1RM directly — the original TM-based percentages have been pre-converted (TM = 90% of 1RM). If you don't know your 1RM, work up to a weight you can lift for 3-5 clean reps and use the app's 1RM calculator.

**Calibration check**: On your first week, the AMRAP set is at 85% of 1RM (= 95% TM). You should be able to hit **3-5 reps** on this set. If you can only get 1 rep, your 1RM is set too high — reduce by 5-10%. If you hit 8+ reps, it's set too low.

For T2 lifts, each exercise uses its own 1RM. Set these based on your actual max for each exercise. The T2 working weights will be ~45-63% of each exercise's 1RM.

For accessories, start with the default weights and adjust up or down based on feel.

## Common Modifications

- **4-day variant**: Drop Day 3 (Overhead Press T1 + Incline Bench Press T2). OHP then only appears as a T2 exercise on Day 1. This is the original version of the program.
- **6-day squat variant**: Add a 6th day with extra Squat volume (8x3 at ~72% TM) and Sumo Deadlift volume (6x3 at ~56% TM).
- **6-day deadlift variant**: Add a 6th day with extra Deadlift volume and Front Squat volume.
- **More back work**: The most common modification. Add Bent Over Row or Pull Up sets to every session. Many users do 50-100 total reps of pulling per session to balance the pressing volume.
- **Different T2 exercises**: Sumo Deadlift can be replaced with Romanian Deadlift, Barbell or Stiff Leg Deadlift. Front Squat can be swapped for Leg Press. Bench Press Close Grip can be replaced with Incline Bench Press, Dumbbell.
- **Row variant**: Replace Overhead Press T2 on Day 1 with Bent Over Row for lifters who need more back volume.

## FAQ

### Is nSuns good for beginners?

nSuns LP is not ideal for true beginners. It's best suited for late beginners to intermediates with 6-18 months of training experience. You need solid technique on squat, bench, deadlift, and overhead press because you'll be handling heavy loads across 17 compound sets per session.

### How many days a week is nSuns?

nSuns is a 5-day program, typically run Monday through Friday with weekends off. There are also popular 4-day and 6-day variants if you need to adjust the schedule.

### How long should I run nSuns?

Run nSuns LP for 12-20 weeks. It's designed for aggressive linear gains. If you're consistently only hitting 1 rep on AMRAPs even after resetting your 1RM, it's time to move to an intermediate program like 5/3/1 BBB or GZCL The Rippler.

### How does progression work on nSuns?

Progression is based on your AMRAP performance on the T1 top set each session. Hit 2-3 reps and your 1RM goes up 5 lbs, 4-5 reps adds 10 lbs, and 6+ reps adds 15 lbs. If you only get 0-1 reps, the weight stays the same.

### How long do nSuns workouts take?

Sessions routinely take 75-90 minutes because of the 17 compound working sets (9 T1 + 8 T2) plus accessories. Rest times of 2-3 minutes on T1 sets add up quickly. Supersetting accessories with T2 sets can save some time.

### What accessories should I add to nSuns?

The program doesn't prescribe specific accessories — you choose 2-4 per day. The most important addition is pulling work like rows and pull-ups on every session, since 4 of 5 days involve pressing movements and the program is very pressing-heavy.

## Program in Liftoscript

This is the full program source. The language reference is at https://www.liftosaur.com/doc/liftoscript.

```liftoscript
# Week 1
## Day 1
main_progress / used: none / progress: custom() {~
  if (dayInWeek > 1 && completedReps >= reps) {
    if (completedReps[3] > 5) { rm1 += 15lb } else
    if (completedReps[3] >= 4) { rm1 += 10lb } else
    if (completedReps[3] >= 2) { rm1 += 5lb }
  }
~}

t2_upper / used: none / 1x6 45%, 1x5 54%, 1x3 63%, 1x5 63%, 1x7 63%, 1x4 63%, 1x6 63%, 1x8 63% \
  / progress: custom(increment: 5lb) {~
  if (completedReps >= reps) {
    rm1 += state.increment
  }
~}

t2_lower / used: none / 1x5 45%, 1x5 54%, 1x3 63%, 1x5 63%, 1x7 63%, 1x4 63%, 1x6 63%, 1x8 63% \
  / progress: custom(increment: 10lb) { ...t2_upper }

Bench Press / 1x8 58%, 1x6 67%, 3x4 76%, 1x5 72%, 1x6 67%, 1x7 63%, 1x8+ 58% \
  / progress: custom() { ...main_progress }
Overhead Press / ...t2_upper / progress: custom() { ...main_progress }
Lat Pulldown / 3x8 70lb / warmup: none / progress: dp(5lb, 8, 12)
Bicep Curl / 4x8 20lb / warmup: none / progress: dp(5lb, 8, 12)

## Day 2
Squat / 1x5 67%, 1x3 76%, 1x1+ 85%, 1x3 81%, 1x3 76%, 1x3 72%, 1x5 67%, 1x5 63%, 1x5+ 58% \
  / progress: custom() { ...main_progress }
Sumo Deadlift / ...t2_lower
Hanging Leg Raise / 3x12 0lb / warmup: none
Leg Extension / 3x8 60lb / warmup: none / progress: dp(5lb, 8, 12)

## Day 3
Overhead Press / 1x5 67%, 1x3 76%, 1x1+ 85%, 1x3 81%, 1x3 76%, 1x3 72%, 1x5 67%, 1x5 63%, 1x5+ 58%
Incline Bench Press / ...t2_upper
Lateral Raise / 4x12 15lb / warmup: none / progress: dp(5lb, 12, 15)
Face Pull / 3x12 30lb / warmup: none / progress: dp(5lb, 12, 15)

## Day 4
Deadlift / 1x5 67%, 1x3 76%, 1x1+ 85%, 1x3 81%, 1x3 76%, 1x3 72%, 1x3 67%, 1x3 63%, 1x3+ 58% \
  / progress: custom() { ...main_progress }
Front Squat / ...t2_lower
Ab Wheel / 3x12 0lb / warmup: none
Chin Up / 3x8 0lb / warmup: none

## Day 5
Bench Press / 1x5 67%, 1x3 76%, 1x1+ 85%, 1x3 81%, 1x5 76%, 1x3 72%, 1x5 67%, 1x3 63%, 1x5+ 58%
Bench Press Close Grip / ...t2_upper
Triceps Pushdown / 3x8 40lb / warmup: none / progress: dp(5lb, 8, 12)
Hammer Curl / 4x8 25lb / warmup: none / progress: dp(5lb, 8, 12)
```
