# P-Zero Full Body

> Latest GZCL program, it's like GZCLP 2.0

- Author: Cody Lefever
- Frequency: 4 days a week
- Workout length: 60-90 minutes
- Goal: strength and hypertrophy
- Training experience: 3 to 12 months
- Web page: https://www.liftosaur.com/programs/pzerofullbody

This is a program from the latest Cody's book. Unlike [GZCLP](https://www.liftosaur.com/programs/gzclp), it prioritizes higher volume, and higher variety in exercises. It's in-between powerlifting and bodybuilding, but leans a bit more to bodybuilding, with higher rep ranges.

Make sure to read the book before doing the program! It gives a detailed explanation how things should work

<!-- faq -->

### What is P-Zero Full Body?

P-Zero Full Body is the latest program from Cody Lefever (creator of GZCL). Think of it as [GZCLP](https://www.liftosaur.com/programs/gzclp) 2.0 — it uses the same GZCL tier system but prioritizes higher volume, more exercise variety, and higher rep ranges than the original [GZCLP](https://www.liftosaur.com/programs/gzclp).

### Is P-Zero good for beginners?

P-Zero is designed for lifters with a few months of training experience. It sits between [GZCLP](https://www.liftosaur.com/programs/gzclp) (pure beginner) and intermediate GZCL programs like [The Rippler](https://www.liftosaur.com/programs/gzcl-the-rippler). If you've outgrown a basic beginner program but aren't ready for advanced periodization, P-Zero is a good fit.

### How many days a week is P-Zero?

P-Zero is a 4-day program. Each day is a full-body workout following the GZCL tier system, with T1 heavy compounds, T2 secondary work, and T3 isolation exercises.

### How is P-Zero different from GZCLP?

P-Zero has higher volume and more exercise variety than [GZCLP](https://www.liftosaur.com/programs/gzclp). It leans more toward bodybuilding with higher rep ranges, while [GZCLP](https://www.liftosaur.com/programs/gzclp) is more powerlifting-focused. P-Zero also uses 4 training days instead of GZCLP's 3.

### Do I need to read the book to run P-Zero?

The book provides the detailed explanation of how the progression and exercise selection work. While the app handles the programming automatically, reading the book helps you understand the reasoning behind the program and how to make smart exercise substitutions.

This is a program from the latest Cody's book. Unlike [GZCLP](https://www.liftosaur.com/programs/gzclp), it prioritizes higher volume, and higher variety in exercises. It's in-between powerlifting and bodybuilding, but leans a bit more to bodybuilding, with higher rep ranges.

Make sure to read the book before doing the program! It gives a detailed explanation how things should work

<!-- faq -->

### What is P-Zero Full Body?

P-Zero Full Body is the latest program from Cody Lefever (creator of GZCL). Think of it as [GZCLP](https://www.liftosaur.com/programs/gzclp) 2.0 — it uses the same GZCL tier system but prioritizes higher volume, more exercise variety, and higher rep ranges than the original [GZCLP](https://www.liftosaur.com/programs/gzclp).

### Is P-Zero good for beginners?

P-Zero is designed for lifters with a few months of training experience. It sits between [GZCLP](https://www.liftosaur.com/programs/gzclp) (pure beginner) and intermediate GZCL programs like [The Rippler](https://www.liftosaur.com/programs/gzcl-the-rippler). If you've outgrown a basic beginner program but aren't ready for advanced periodization, P-Zero is a good fit.

### How many days a week is P-Zero?

P-Zero is a 4-day program. Each day is a full-body workout following the GZCL tier system, with T1 heavy compounds, T2 secondary work, and T3 isolation exercises.

### How is P-Zero different from GZCLP?

P-Zero has higher volume and more exercise variety than [GZCLP](https://www.liftosaur.com/programs/gzclp). It leans more toward bodybuilding with higher rep ranges, while [GZCLP](https://www.liftosaur.com/programs/gzclp) is more powerlifting-focused. P-Zero also uses 4 training days instead of GZCLP's 3.

### Do I need to read the book to run P-Zero?

The book provides the detailed explanation of how the progression and exercise selection work. While the app handles the programming automatically, reading the book helps you understand the reasoning behind the program and how to make smart exercise substitutions.

## Program in Liftoscript

This is the full program source. The language reference is at https://www.liftosaur.com/doc/liftoscript.

```liftoscript
# Week 1
## Workout A1
// ...T1
T1: Deadlift / ...T1

// ...T2
T2: Bench Press / ...T2

// ...T3
T3: T Bar Row / ...T3

// ...T3
T3: Leg Press / ...T3

// ...T3
T3: Chest Dip / ...T3

// ...T3
T3: Cable Crunch / ...T3

## Workout B1
// ...T1
T1: Overhead Press / ...T1

// ...T2
T2: Squat / ...T2

// ...T3
T3: Pull Up / ...T3

// ...T3
T3: Incline Bench Press, Dumbbell / ...T3

// ...T3
T3: Seated Leg Curl / ...T3

// ...T3
T3: Bicep Curl / ...T3

## Workout A2
// ...T1
T1: Bench Press / ...T1

// ...T2
T2: Deadlift / ...T2

// ...T3
T3: Seated Row / ...T3

// ...T3
T3: Shoulder Press / ...T3

// ...T3
T3: Leg Extension / ...T3

// ...T3
T3: Side Crunch, Cable / ...T3

## Workout B2
// ...T1
T1: Squat / ...T1

// ...T2
T2: Overhead Press / ...T2

// ...T3
T3: Romanian Deadlift, Barbell / ...T3

// ...T3
T3: Bench Press, Dumbbell / ...T3

// ...T3
T3: Lateral Raise, Cable / ...T3

// ...T3
T3: Flat Leg Raise / ...T3



// **T1**. Set your 1RM before start.

// **T1**.
T1 / used: none / 3x4, 1x5+ / 3x3, 1x4+ / 3x2, 1x3+ / 72% / progress: custom(increase: 5lb, stage1weight: 0lb) {~
  if (descriptionIndex == 1) {
    descriptionIndex = 2
  }
  if (setVariationIndex == 1) {
    state.stage1weight = weights[ns]
  }
  weights += state.increase
  if (completedReps[ns] < reps[ns]) {
    if (setVariationIndex == 3) {
      setVariationIndex = 1
      weights = state.stage1weight + state.increase
    } else {
      setVariationIndex += 1
    }
  }
~}


// **T2**. Set your 1RM before start.

// **T2**.
T2 / used: none / 4x12 / 4x10 / 4x8 / 52% 120s / progress: custom(increase: 5lb, stage1weight: 0lb) {~
  if (descriptionIndex == 1) {
    descriptionIndex = 2
  }
  if (setVariationIndex == 1) {
    state.stage1weight = weights[ns]
  }
  weights += state.increase
  if (!(completedReps >= reps)) {
    if (setVariationIndex == 3) {
      setVariationIndex = 1
      weights = state.stage1weight + state.increase
    } else {
      setVariationIndex += 1
    }
  }
~}


// **T3**. You need to get total reps indicated by max reps in range in
// as few sets as possible. Complete a set with some reps, then add another
// set and complete again. If you do all required reps in <= 4 sets, weight goes up.
// If more than 4 sets - it goes to the next stage (dropping the goal reps)
T3 / used: none / 1x1-60+ / 50% 90s / progress: custom(increase: 5lb, initialReps: 60, diff: 15, stage1weight: 0lb) {~
  if (reps[ns] == state.initialReps) {
    state.stage1weight = weights[ns]
  }
  if (sum(completedReps) >= reps[ns]) {
    if (completedNumberOfSets <= 4) {
      weights += state.increase
    } else {
      if (reps[ns] == state.initialReps - state.diff * 2) {
        weights = state.stage1weight + state.increase
        reps = state.initialReps
      } else {
        reps -= state.diff
      }
    }
  }
~}

// **T1 Ultra**.
// It asks you if want to go switch to the next stage at the end (0 - keep, 1 - switch).
// Switch to the next stage if the last set is significantly slower than first one.
T1Ultra / used: none / 3x1 / 2x1 / 1x1 / 90% / progress: custom(increase: 5lb, nextstage+: 0) {~
  weights += state.increase
  if (state.nextstage > 0) {
    setVariationIndex += 1
  }
~}
```
